Preventive maintenance

Warehouse winter maintenance checklist for NJ and NY facilities.

Cold weather finds the weak points of a warehouse: a stairwell with no heat, a clogged roof drain, a dock leveler nobody has serviced since spring. This checklist covers what to inspect before the first freeze and what to keep checking until March, with the source for each item.

By Bill Polynice6 min read

The short version

  • Keep every area that holds water-filled pipe at 40°F or warmer. That is the number fire protection guidance is built around12.
  • Dry-pipe sprinkler systems need their low-point drains emptied before freezing weather, and again as needed through the winter1.
  • Dock levelers are a planned-maintenance item. One manufacturer calls for service every 90 days on a single shift and every 30 days on multiple shifts3.
  • Snow and ice on walking surfaces is an OSHA matter: employers must keep walking-working surfaces free of those hazards4.

Most winter damage in a warehouse is predictable. The pipe that freezes is in the corner that never had heat. The roof leak starts at the drain nobody cleared in October. The dock door that sticks in January was already dragging in the fall. A checklist run before the first freeze, and kept up through the season, catches most of it.

This page prints as a plain black-and-white checklist.

Heat and fire protection

Start with the sprinkler system, because a frozen pipe can flood the building it was installed to protect. Water-filled pipe has to be kept at a minimum of 40°F1, and FM's guidance for commercial property is the same: provide enough fixed heat to hold more than 40°F wherever there is water-filled piping2.

  • Find the cold spots. Check the heat in vestibules and entryways, stairwells, unoccupied rooms and mechanical spaces. These are among the areas the National Fire Sprinkler Association flags as vulnerable to freezing5.
  • Service the heating equipment before the cold. Schedule annual preventive maintenance, change the filters, and confirm that exhaust gases vent properly6.
  • Pick your heating repair service now. Have someone lined up who can come quickly, including after hours, before an outage happens mid-season6.
  • Test the low-temperature alarms. Check that freeze-protection devices and alarms work before the weather turns6. A monitoring system that sends an alert to a phone when the inside temperature drops is worth having7.
  • Dry-pipe systems: drain the low points. Low-point and auxiliary drains are to be emptied after each operation of the system, before the onset of freezing weather, and as needed after that1.
  • Dry-pipe valve rooms: watch the temperature. The wet side of a dry-pipe valve has to stay at 40°F or more. The enclosure is inspected daily, or weekly if the room has a low-temperature alarm1.
  • Antifreeze systems: test the solution before freezing weather to confirm it protects to the temperatures expected in your region1.
  • Use a licensed fire protection contractor for sprinkler maintenance, and ask them about the system's exposure to winter weather6.

Roof and drainage

Water that cannot drain off a roof can freeze, form ice dams and add to the snow load6.

  • Inspect and repair the roof cover, flashing and gutters before winter6.
  • Clear the roof drains and gutters now, and again through the season. When drains cannot work, ice dams can form and cause interior water damage78.
  • Check that gutters and downspouts are secure. Heavy snow and ice can pull them away from the building7.
  • Do not send anyone onto a snow-loaded roof without a check. OSHA says a surface weighed down by snow must be inspected by a competent person to determine that it is structurally safe before workers go on it9.

Building envelope and plumbing

  • Seal the openings. Close cracks, holes and gaps around windows and doors on exterior walls so cold air does not reach the wall cavity7.
  • Insulate exposed pipe along exterior walls and in unheated or minimally heated areas6.
  • Shut off and drain exterior faucets, hoses and irrigation systems6.
  • Walk the quiet areas. Check unoccupied parts of the building often, since nobody is there to notice a cold room7.

Loading docks and doors

Dock equipment takes the weather directly and is used on every shift, so small faults grow quickly in winter.

  • Put the levelers on a service interval. One manufacturer recommends planned maintenance by a qualified technician every 90 days for single-shift operations and every 30 days for multi-shift operations, with an operator check before each use3.
  • Keep the levelers clear in winter. Remove snow, ice and debris often, and have hydraulic components inspected for freeze-related wear3.
  • Work through the 90-day list. One dock leveler owner's manual lists these at 90 days: clean the pit, inspect the lip mechanism, lubricate, and inspect the weather seals and the dock bumpers. It calls for four inches of bumper protection and replacement of worn, torn, loose or missing bumpers10.
  • Check dock seals and shelters for tears and gaps. Every gap is heat leaving the building and cold reaching the dock.
  • Run every overhead door through a full cycle. Fix dragging doors, damaged panels and worn bottom seals before the cold makes them worse.

Walkways, lots and approaches

Under OSHA's walking-working surfaces standard, employers must keep those surfaces free of hazards including snow and ice, inspect them regularly and as necessary, and correct or guard a hazard before employees use the surface again4. OSHA's winter guidance is to clear walking surfaces and spread deicer as quickly as possible after a storm9.

  • Have the snow plan in writing before the first storm: trigger depth, open-by time, where snow is piled, and who to call. Our guide to commercial snow removal contracts covers what to settle.
  • Repair trip hazards now. Potholes, heaved slabs and broken curbs are harder to see and harder to fix under snow.
  • Stake the edges. Mark curbs, islands and hydrants so plows can find them.
  • Stock the entrances. Keep deicer and walk-off mats at every door that people use.

Air quality when the doors stay shut

Forklifts with internal combustion engines can cause high carbon monoxide levels in enclosed work areas, and OSHA warns that cold weather raises the risk because doors and windows that are normally open are closed11. The OSHA limit for carbon monoxide is 50 parts per million averaged over an eight-hour period12.

  • Keep engines maintained, and do not run a truck that needs service11.
  • Install carbon monoxide monitors in areas where fuel-powered trucks work11.
  • Check the ventilation. Confirm that exhaust and make-up air fans run, and consider upgrading ventilation where trucks work in closed areas11.
  • Limit idling, especially inside trailers11.

Lighting and power

  • Walk the site after dark. Winter puts more of the working day in darkness. Replace failed fixtures at docks, walkways, stairs and parking areas.
  • Test backup power. Backup power helps hold building temperature and lowers the risk of frozen pipes. A permanent generator needs a maintenance plan with weekly, monthly and annual checks, and a portable one is operated outside in a well-ventilated area8.

A simple schedule

When What to do
Before the first freeze Heating service, sprinkler winter service by a licensed contractor, roof and drain inspection, dock equipment service, snow plan signed
Daily or weekly Dry-pipe valve room temperature: daily, or weekly with a low-temperature alarm1. Operator checks on dock levelers before use3
After every storm Clear and treat walking surfaces9, check roof drains, log the service
Every 30 to 90 days Planned maintenance on dock levelers, by shift pattern3
After a loss of heat Watch the coldest sprinkler areas, then inspect for breaks when heat returns2

Where PrecisionPro fits

PrecisionPro runs preventive maintenance plans for warehouses and distribution centers in New Jersey and New York: scheduled visits, a written checklist for each building, and licensed trade partners for specialty systems such as fire protection and electrical. If something fails mid-season, 24/7 emergency service is one call. To set up a plan before the cold, get in touch.

Sources

  1. How to Winterize a Fire Sprinkler SystemNational Fire Sprinkler Association. Checked November 12, 2026.
  2. Property Loss Prevention Data Sheet 9-18: Prevention of Freeze-UpsFM. Checked November 12, 2026.
  3. Frequently Asked Questions: Dock LevelersBlue Giant Equipment. Checked November 12, 2026.
  4. 29 CFR 1910.22, Walking-Working Surfaces: General RequirementsOccupational Safety and Health Administration. Checked November 12, 2026.
  5. Cold, Hard Facts: Protecting Sprinklers from Jack FrostNational Fire Sprinkler Association. Checked November 12, 2026.
  6. Winter Ready BusinessInsurance Institute for Business & Home Safety. Checked November 12, 2026.
  7. Prepare Your Business for Winter WeatherInsurance Institute for Business & Home Safety. Checked November 12, 2026.
  8. Protect Your Business from Winter WeatherInsurance Institute for Business & Home Safety. Checked November 12, 2026.
  9. Winter Weather: Hazards and PrecautionsOccupational Safety and Health Administration. Checked November 12, 2026.
  10. AL-900 Owner's ManualRite-Hite. Checked November 12, 2026.
  11. Powered Industrial Trucks eTool: Enclosed and Hazardous AreasOccupational Safety and Health Administration. Checked November 12, 2026.
  12. Carbon Monoxide Poisoning Fact SheetOccupational Safety and Health Administration. Checked November 12, 2026.

This checklist is general guidance drawn from the sources listed. Your equipment manuals, your insurer and your local fire official set the requirements for your building.

Want this checklist run on your building? Let's talk.